
Menu item
Symbol Set 10U
PCL Emulation Settings
Point Size
PCL Emulation Settings
Pitch
PCL Emulation Settings
Orientation
Portrait
Landscape
PCL Emulation Settings
Lines per Page
60
64
PCL Emulation Settings
A4 Width
198mm
203mm
Description
Specifies the symbol set for each font name
Notes:
•10U
•12U
•A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.
Changes the point size for scalable typographic fonts
Notes:
•12 is the factory default setting.
•Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
•Point sizes can be increased or decreased in
Specifies the font pitch for scalable monospaced fonts
Notes:
•10 is the factory default setting.
•Pitch refers to the number of
•Pitch can be increased or decreased in
•For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.
Specifies the orientation of text and graphics on the page
Notes:
•Portrait is the factory default setting.
•Portrait prints text and graphics parallel to the short edge of the page.
•Landscape prints text and graphics parallel to the long edge of the page.
Specifies the number of lines that print on each page
Notes:
•60 is the US factory default setting. 64 is the international default setting.
•The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.
Sets the printer to print on
Notes:
•198 mm is the factory default setting.
•The
Understanding printer menus