Menu item
Font Priority
Resident
Flash/Disk
Image Smoothing
On
Off
PCL Emul menu
Menu item
Font Source
Resident
Disk
Flash
Download
All
Font Name
RO Courier
Description
Establishes the font search order
Notes:
•Resident is the factory default setting.
•A formatted flash memory option card or printer hard disk must be installed in the printer and operating properly for this menu item to be available.
•The flash memory option or printer hard disk cannot be Read/Write, Write, or password protected.
•Job Buffer Size must not be set to 100%.
Enhances the contrast and sharpness of
Notes:
•Off is the factory default setting.
•Image Smoothing has no effect on images that are 300 dpi or higher in resolution.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
•Flash and Disk settings show all fonts resident in that option.
•Flash option must be properly formatted and cannot be Read/Write, Write, or password protected.
•Download shows all the fonts downloaded into RAM.
•All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Notes:
•RO Courier is the factory default setting.
•RO Courier shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, K for Disk, and D for download.
Understanding printer menus
