Menu item
Job Buffering
Off
On
Auto
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports Network Card
TCP/IP
IPv6 Wireless AppleTalk NetWare LexLink
Description
Temporarily stores jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.
Notes:
•Off is the factory default setting.
•The On value buffers jobs on the printer hard disk. This menu selection appears only when a formatted disk is installed and is not defective.
•The Auto setting buffers print jobs only if the printer is busy processing data from another input port.
•Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•Auto is the factory default setting.
•The Off setting filters print jobs using the standard protocol.
•The On setting processes raw binary PostScript print jobs.
For descriptions and settings of the network setup menus, see the following:
•“Network Reports menu” on page 105
•“Network Card menu” on page 106
•“TCP/IP menu” on page 106
•“IPv6 menu” on page 107
•“Wireless menu” on page 108
•“AppleTalk menu” on page 108
•“NetWare menu” on page 109
•“LexLink menu” on page 110
Note: The Wireless menu appears only when the printer is connected to a wireless network.
Network Reports menu
This menu is available from the Network/Ports menu:
Understanding printer menus
