3Click Timeouts.
4In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
5Click Submit.

Using the printer control panel

1Make sure the printer is on and Ready appears.
2Press .
3Press the arrow buttons until Settings appears, and then press .
4Press the arrow buttons until General Settings appears, and then press .
5Press the arrow buttons until Timeouts appears, and then press .
6Press the arrow buttons until Power Saver appears, and then press .
7Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver
mode, and then press .
Adjusting the brightness of the display
To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display.
Available settings range from 1–10. The factory default setting is 5.

Using the Embedded Web Server

1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2Click Settings, and then click Utilities Menu.
3In the LCD Brightness box, type in the brightness you want for your display.
4Click Submit.

Using the printer control panel

1Make sure the printer is on and Ready appears.
2Press .
3Press the arrow buttons until Settings appears, and then press .
4Press the arrow buttons until Utilities Menu appears, and then press .
5Press the arrow buttons until LCD Brightness appears, and then press .
6Press the arrow buttons to select a setting, and then press .
Minimizing your printer's environmental impact
53