190
Toner Alarm
Purpose:
To specify how the printer responds when it is out of toner.
Value s:
See also:
Auto Continue
Wait Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the
computer. When this timeout expires, the print job is canceled.
Value s:
Note: Wait Timeout is only available when you use PostScript emulation. This menu item
has no effect on PCL emulation print jobs.
Off* An error message is displayed until someone replaces the p rint cartridge. If an A uto
Continue value is selected from the Setup Menu, the printer resumes printing after
the specified timeout value.
Single Printer stops printing, displays an error message, and sounds three quick beeps.
Continuous Printer stops printing, displays an error message, and repeats three beeps e very 10
seconds until the print cartridge is replaced.
Disabled Disables Wait Timeout.
15...65535 (40*) Specifies the amount of time the printer waits for additional data bef ore it can cels
the job.