205
51 Disabling Power Saver
If you always want your printer ready to print without delays, you may want to disable Power Sa ver in
the Setup Menu. If the Disabled value is not available, first change the EnergyConse rve setting to Off
in the Config Menu:
1Turn the printer off.
2Press and hold the Select and Return buttons, and then turn the printer on.
3Release the buttons when Performing Self Test appears on the display.
When the printer self test is done, Config Menu is displayed.
4Press Menu until you see Energy Conserve, and then press Select.
5Press Menu until you see Off, and then press Select.
Energy Conserve SAVED briefly appears, and then Config Menu is displayed.
6Press Menu until you see Exit Config Menu, and then press Select.
Activating Menu Changes briefly appears, followed by Performing Self Test. The
printer then displays the Ready message.
Now you can select the Disabled value from the Power Saver menu item.
Note: You can also disable Power Saver by issuing a Printer Job Language (PJL)
command. For more information, refer to the Technical Reference available on
Lexmark’s Web site at www.lexmark.com.