21 Replacing the staple cartridge

When Staples Low or Staples Empty appears on the operator panel display, complete the steps to insert a new staple cartridge in the finisher. Refer to the illustrations inside the stapler access door for more information. For information about ordering staple cartridges, see Ordering supplies.

Note: If Staple Alarm is set to Single, the printer stops printing and displays the Load Staples message. Install a new staple cartridge or press Go to clear the message and continue printing. If Staple Alarm is set to Continuous, the printer displays the Load Staples message and continues printing.

1Open the stapler access door and remove the staple cartridge holder by pulling on the colored tab.

Note: A partial sheet of staples will remain in the staple cartridge holder when this message appears. Do not remove this sheet. Install a new staple cartridge to properly feed the partial sheet of staples.

2Remove the empty staple cartridge.

3Install the new staple cartridge.

4Reinstall the staple cartridge holder and close the stapler access door.

Priming Stapler appears on the display. Priming occurs automatically without creating any output, and ensures the stapler is functioning properly.

60

Page 60
Image 60
Lexmark 620, 622 manual Replacing the staple cartridge