Restoring Factory
Defaults
What this message means:
The printer is restoring the factory default printer settings. When factory default settings are restored:
•All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
•All menu settings return to the factory default setting except:
–The Display Language setting in the Setup Menu.
–All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, USB Menu, and Fax Menu.
What you can do:
Wait for the message to clear.
Restoring Held Jobs
What this message means:
The printer is restoring held jobs from the hard disk.
What you can do:
Wait for the message to clear. No button actions are possible while this message is displayed.
Serial <x>
What this message means:
A serial interface is the active communication link.
Staples Empty
What this message means:
The stapler is out of staples, or the stapler is not installed.
What you can do:
If necessary, install a new staple cartridge. Reinsert the stapler to clear the message.
Note: A partial sheet of staples will remain in the staple cartridge holder when this message appears. Do not remove this sheet. Install a new staple cartridge to properly feed the partial sheet of staples.
