Parallel Buffer

Purpose:

To configure the size of the parallel input buffer.

Values:

Disabled

Disables job buffering. Any jobs already buffered on the disk are printed before

 

normal processing of incoming jobs resumes.

Auto*

Printer automatically calculates the Parallel Buffer size (recommended setting).

3K to maximum

User specifies the Parallel Buffer size. The maximum size depends on the

size allowed

amount of memory in your printer, the size of the other link buffers, and

 

whether Resource Save is set to On or Off. To maximize the range for the

 

Parallel Buffer size, disable or reduce the size of the serial, infrared, LocalTalk,

 

and USB buffers.

Note: Changing the Parallel Buffer menu item automatically resets the printer.

See also:

Resource Save

Parallel Mode 1

Purpose:

To control the pull-up resistors on the parallel port signals. This menu item is useful for personal computers that have open collector outputs on the parallel port signals.

Values:

On

Disables the resistors.

Off* Enables the resistors.

Parallel Mode 2

Purpose:

To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.

Values:

On* Samples parallel port data on the leading edge of strobe.

Off

Samples parallel port data on the trailing edge of strobe.

173

Page 173
Image 173
Lexmark 622, 620 manual Parallel Buffer, Parallel Mode, 173