Lincoln Electric SVM100-A service manual Options / Accessories, Undercarriage Function

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

C-1 ACCESSORIES

OPTIONS / ACCESSORIES

•Hand Amptrol (K812)

•Foot Amptrol (K870)

•Arc Start Switch (K814)

•Magnum Cooler Horizontal TIG Mounting Bracket (K559-2)

•Undercarriage (K932-1)

UNDERCARRIAGE FUNCTION

The Square Wave TIG 255 is designed to be used with a Lincoln K932-1 Undercarriage. Complete installation instructions are included with the K932-1 undercarriage. When the undercarriage is properly installed, the Square Wave TIG 255 lift bail is non- functional. Do not attempt to lift the power source with the undercarriage attached. The undercarriage is designed for hand moving only; mechanized towing can lead to injury and/or damage to the Square Wave TIG 255.

INSTALLATION OF FIELD

INSTALLED OPTIONS

Instructions for connecting the K932-1 Undercarriage and the K559-2 Magnum Cooler Horizontal TIG Mounting Bracket are included with those acces- sories.

Installation of the K812 Hand Amptrol, the K814 Arc

Start Switch and K870 Foot Amptrol are as follows:

Lift the Output Cover Door (if so equipped) on the Square Wave TIG 255. Feed the cable up through the strain relief holes in the base, and connect the 6-pin MS-type (Amphenol) connector to the Remote Receptacle (See Figure A.2). Secure with the thread- ed collar.

SQUARE WAVE TIG 255