Middleby Marshall PS314, PS360WB English, 9 - Bolts and Spacers, 11 - Trim Strip Installation

	SECTION 2 - INSTALLATION
4. Insert three of the supplied 1/2 x 5” bolts through the holes	Figure 2-9 - Bolts and Spacers
in the frame of the right oven, pointing outward as shown in
Figure 2-9. Then, slide the spacers into place on the bolts.

2-1/2" x 2-1/2"

(64x64mm)

spacers

2-1/2" x 8" (64x203mm)

spacers

ENGLISH

5.	Push the ovens together. Check that the mounting bolts,	Figure 2-10 - Aligning the Sections
	alignment plate, and sealing gasket are all properly aligned.
	See Figure 2-10.
6.	Tighten all of the attaching bolts. Check that the mating
	edges of the ovens align properly. If gaps appear between
	the tops of the ovens, it will be necessary to loosen the
	connecting bolts and realign the ovens.

7.	Attach the front trim strip between the two ovens, as shown	Figure 2-11 - Trim Strip Installation
	in Figure 2-11.
8.	Replace the rear axial cooling fans. See Figure 2-8.

Trim strip

11