Loading Paper

Loading Paper onto Tray 2/Tray 3

Note

Make sure that the Tray 2/Tray 3 cassette for the proper size of paper to be used for printing has been installed into the second/third paper cassette unit. For instructions on inserting (and removing) the Tray 2/ Tray 3 cassette into (and from) the second/third paper cassette unit, refer to Chapter 2.

1 Slide Tray 2/Tray 3 out of the second/third paper cassette unit

as illustrated.

Tray 2

Tray 3

Chapter 3

Using the Printer

Note

The cassette is designed to remain in the unit during the normal loading and operation of the printer. To remove Tray 2/Tray 3 from the unit, pull it out as far as it will go without force. Then gently raise the for- ward-end up, and remove Tray 2/Tray 3 from the unit.

Tray 2 and Tray 3 are available as an option for this printer. Contact Minolta Technical Support to find out how you can acquire this tray to increase the capabilities of your printer.

3-7

Page 67
Image 67
Minolta 18L manual Loading Paper onto Tray 2/Tray, As illustrated