Chapter 3

Using the Printer

Paper

Envelopes (Tray 1 and Manual Feed Tray)

Paper

Env. Com10

Env. DL

Env. C5

Env. Monarch

Feeding

105 × 241mm

110 × 220mm

162 × 229mm

98 × 190mm

Port

4-1/8" × 9-1/2"

4-5/16" × 8-11/16"

6-3/8" × 9"

3-7/8"×7-1/2"

 

 

 

 

 

 

 

 

 

 

Tray 1

 

 

 

 

Manual

Feed Tray

• Specialty paper is not supported for duplex printing.

Note

Do not use the following types of paper to avoid reduced print quality, a misfeed or a print failure.

Paper already used in a thermal transfer printer or ink jet printer.

Paper that is too thin or too thick.

Paper folded, curled or torn.

Paper having binding holes or perforations.

Paper with surfaces that are too smooth or too rough or with varying surfaces.

Paper having special coatings on their surfaces such as carbon paper, heat-sensitive paper and pressure-sensitive paper.

Sheets of various sizes.

Paper not cut on right angles.

Paper bound by glue, staples or clips.

Paper affixed with labels which are easy to peel.

Post cards that are warped or bent.

Envelopes should meet the following requirements:

Sharp folds and edges.

General mailing envelopes without seals on the glued portion.

Having flaps the full width of the envelope (unacceptable if the flap is glued).

Wrinkle-free, no fasteners.

Generally, envelopes perform well, but some types may wrinkle. We strongly recommend testing any type of envelope before buying it in large amounts.

For more information, refer to “Loading Paper”.

3-2

Page 62
Image 62
Minolta 18L manual Envelopes Tray 1 and Manual Feed Tray, Specialty paper is not supported for duplex printing