Options
3 With one hand holding the duplex unit in position, use a Phillips screwdriver to tighten the screws that are permanently attached to the back of the duplex unit.
Chapter 2 |
Setting-up
Note
•Hold up the duplex unit with your hand during installation until it is secured to the printer with the screws.
4 Connect the power cord to the printer and then turn the printer on. See “Connecting the Power Cord”, page
See “Turning On the Printer”, page
5 Select the Printer Information in the Printer Status Display to ver- ify that duplex unit is displayed in the Printer Information dialog. See page
