Motorola G24 Phone and Date Books and Clock

Chapter 3: AT Commands Reference
June 30, 2008 AT Commands Reference Manual 3 -71
Phone and Date Books and Clock
Directory Access Commands - Phone Book
This set of commands enables read/write access to the phone book contained within the G24,
including both the numeric and the alpha information contained in the location. The presentation
is according to GSM 07.07.
In some cases, it may be possible to use these commands to access the dialed and received call
stacks. However, as these phone books cannot be edited, the +CPBW command does not work on
them.
+CPBS, Select Phone Book Memory
This command handles the selection of the memory to be used for reading and writing entries in
the G24’s phone books’ memory. (When there is separate storage on the SIM card and in the
G24’s internal EEPROM).
Note: Read format of +CPBS joins RC and MC, therefore the united list will be prompted.
Command
Type Syntax Response/Action Remarks
Set AT+CPBS=<storage>
[,<pin2>]
<pin2>is optional
while <storage> =
"FD" only
OK
or:
+CME ERROR: <err>
The Set command selects the phone
book memory storage which is to be
used by other phone book commands.
Read +CPBS? +CPBS:
<storage>[,<used>,<tot
al>]
The Read command returns the
currently selected phone book
memory, number of used entries and
total number of entries in the phone
book memory.
Test +CPBS=? +CPBS: (list of
supported <storage>s)
OK
Test command returns the supported
storages as a compound value.