Motorola G24 - page 596

AT Commands Alphabetical Summary
A-10 AT Commands Reference Manual June 30, 2008
+CSMS This command handles the
selection of the SMS service
type.
Page 3-98
+CSNS This command handles the
selection of the bearer or
teleservice to be used when a
mobile terminated single
numbering scheme call is
established.
Page 3-36
+CSSN This command handles the
enabling and disabling of
supplementary service-related,
network-initiated, notifications.
Page 3-62
+CSQ This command returns the signal
strength received by the G24. Page 3-169
+CSVM This command handles the
selection of the number to the
voice mail server.
Page 3-77
+CTFR1 This command terminates an
incoming call and diverts the
caller to the number previously
defined in CCFC, or to a voice
mail if one exists for the
subscriber.
Page 3-39
+CUSD This command allows control of
Unstructured Supplementary
Service Data (USSD), according
to GSM 02.90.
Page 3-65
+EMPC This command unlocks or
resets the first PLMN of the
inserted SIM.
Page 3-267
+EPIN This command is only relevant
for phones that use SIM cards. It
verifies the PIN2 indicator.
Page 3-261
+FAR This command is supported for
backward compatibility only, and
has no effect.
Page 3-430
+FCL This command is supported for
backward compatibility only, and
has no effect.
Page 3-430
+FCLASS This command places the
terminal in particular mode of
operation (data, fax, voice).
Page 3-432
+FDD This command is supported for
backward compatibility only, and
has no effect.
Page 3-430
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page