Motorola G24 - page 469

Chapter 3: AT Commands Reference
June 30, 2008 AT Commands Reference Manual 3-385
The following table shows the Set Event List parameters.
Note: Each language code consists of a pair of alphanumeric characters, defined in ISO 639 [4].
Each character is coded on one byte using the SMS default 7-bit coded alphabet, as
defined in TS 23.038, with bit 8 set to 0. For a list of language codes, refer to the section
that follows.
Table 3-257:Set Event List Parameters
<Parameter> Description
<Result> 5 User Activity event
6 Idle Screen Available event
8 Language Selection event
9 Browse r Termination event
<Data> None User Activity event
None Idle Screen Available event
0 Browser Termination event (User terminated)
1 Browser Termination event (Error terminated)
4 Language Selection event, with string coded as follows:
Byte(s) Description Length
1 Language tag 1
2 Length=’02’ 1
3-4 Language 2