AT Commands Summary
1-32 AT Commands Reference Manual June 30, 20 08
+MTKE This command enables/disables the SIM ToolKit functionalities. Page 3-374
+MTKP This is both a command and an unsolicited event. The command
responds to an unsolicited event. Page 3-375
+MTKM This is both a command and an unsolicited event. The command
selects items from the menu. Page 3-390
+MTKC This unsolicited event notifies the terminal when supplementary
services, SMS Control or Call Control are modified. Page 3-392
TCP/IP Commands
+MIPCALL This command creates a wireless PPP connection with the GGSN or
CSD service provider and returns a valid dynamic IP for the G24. Page 3-393
+MIPOPEN This command causes the G24 module to initialize a new socket and
open a connection with a remote side. Page 3-395
+MIPODM This command causes the G24 module to initialize a new socket in
Online Data Mode and open a connection with a remote side. Page3-397
+MIPCLOSE This command causes the G24 module to free the socket
accumulating buffer and disconnect the G24 from a remote side. Page 3-400
+MIPSETS This command causes the G24 to set a watermark in the
accumulating buffer. When the watermark is reached, data is pushed
from the accumulating buffer into the protocol stack.
Page 3-402
+MIPSEND This command causes the G24 to transmit the data that the terminal
provides, using an existing protocol stack. Page 3-403
+MIPPUSH This command causes the G24 module to push the data accumulated
in its accumulating buffers into the protocol stack. Page 3-405
+MIPFLUSH This command causes the G24 module to flush (delete) data
accumulated in its accumulating buffers. Page 3-406
+MIPRUDP This unsolicited event is sent to the terminal when data is received
from the UDP protocol stack. Page 3-407
+MIPRTCP This unsolicited event is sent to the terminal when data is received
from the TCP protocol stack. Page 3-407
+MIPSTAT This unsolicited event is sent to the terminal indicating a change in
link status. Page 3-408
+MIPDATA This unsolicited event is sent to the terminal indicating a data
comes from Network when G24 is in pseudo-command
mode.
Page 3-409
+MIPXOFF This unsolicited event is sent to the terminal to stop sending data. Page3-409
+MIPXON This unsolicited event is sent to the terminal when the G24 has free
memory in the accumulating buffer. Page 3-410
+MPING This command will allow verifying IP connectivity to another
remote machine (computer) by sending one or more Internet Control
Message Protocol (ICMP) Echo Request messages.
Page 3-413
Table 1-1:AT Commands (Cont.)
AT Com man d Description Page