Motorola G24 +MCELL, Motorola Cell Description

Chapter 3: AT Commands Reference
June 30, 2008 AT Commands Reference Manual 3-181
+MCELL, Motorola Cell Description
This command displays information about the Cellular Network. The information is divided
throughout 20 screens, each of them with different parameters data.
The following table shows the +MCELL parameters.
Command Type Syntax Response/Action Remarks
Set +MCELL=<mode
>, <screen_num> +MCELL: <screen_title>
<CR><LF><screen_info>
OK
or:
+CME ERROR: <err>
The Set command will return the
relevant <screen_info> according to
requested <screen_num>.
Read +MCELL? OK
or:
+CME ERROR: <err>
The Read command just returns OK
and does nothing.
Test +MCELL=? +MCELL: (list of
supported <mode>s),(list
of supported
<screen_num>s)
OK
or:
+CME ERROR: <err>
The Test command returns the
possible <mode> & <screen_num>
values.
Table 3-107:+MCELL Parameters
<Parameter> Description
<mode> 0 One shot requested.
<screen_num> The requested screen number - An integer number.
1 Serving Idle Information screen
2 Circuit Switched Serving Cell Information screen
3 Miscellaneous Information screen
4 Uplink Data Transfer screen
5 Downlink Data Transfer screen
6 Neighbor 1 Cell Information screen
7 Neighbor 2 Cell Information screen
8 Neighbor 3 Cell Information screen
9 Neighbor 4 Cell Information screen
10 Neighbor 5 Cell Information screen
11 Neighbor 6 Cell Information screen
12 Neighbor Cells Summary screen
13 Re-selection screen
14 Hopping Information screen
15 PDP1 Context Information screen
16 PDP2 Context Information screen
17 PDP3 Context Information screen
18 PDP4 Context Information screen
19 Serving Cell paging parameters
20 Optional SYSINFOs