Motorola HC12 - page 228

User’s Manual MCUez HC12 Assembler
228 Operating Procedures MOTOROLA
Operating Procedures
NOTE: The statement Vector = READ_ONLY 0xFFF2 TO 0xFFFF defines the
memory range for the vector table.
The statement
VectorTable INTO Vector specifies that the vector table
should be loaded in the read-only memory area vector. This means the constant
IRQInt will be allocated at address 0xFFF2, the constant XIRQInt will be
allocated at address
0xFFF4 , and so on. The constant ResetInt will be
allocated at address
0xFFFE . The statement ENTRIES * END switches
smart linking OFF. If this statement is missing in the PRM file, the vector table
will not be linked with the application, because it is never referenced. The smart
linker only links the referenced objects in the absolute file.
11.4.3 Initializing the Vector Table in the Assembly Source File Using an Absolute Section
Initializing the vector table in the assembly source file requires that all entries
in the table are initialized. Interrupts that are not used must be associated with
a standard handler.
The labels or functions that are inserted in the vector table must be implemented
in the assembly source file or an external reference must be available for them.
The vector table can be defined in an assembly source file in an additional
section containing constant variables.