SWITCH SETTING SHEETS
CHAPTER 3 SWITCH SETTING SHEETS
1. GENERAL
This chapter shows switch setting on the individual circuit cards used in the basic CCIS network (not including cir- cuit cards related to Network through FCCS Groups and NEAX2000 IPS). These sheets are used when setting the switches on the circuit cards during system installation.
The contents of the Switch Setting for each circuit card contains of the following information.
•Mounting slot(s) in the related Module
•Location of switches and switch setting positions
•Note(s) pertaining to switch positions
2.LIST OF CIRCUIT CARDS
Table
Please refer to “Circuit Card Manual” for more information.
Table
SYMBOL | CIRCUIT CARD | REMARKS | |
|
|
| |
CCH | For Digital/Analog CCIS Line | ||
|
|
| |
CCT | For Digital CCIS Line (1.544 Mb/s) | ||
|
| ||
For Digital CCIS Line (2.048 Mb/s) | |||
| |||
|
|
| |
DTI | For Digital CCIS Line (1.544 Mb/s) | ||
|
| ||
For Digital CCIS Line (2.048 Mb/s) | |||
| |||
|
|
| |
OSC | Oscillator (High precision oscillator for the | ||
|
|
| |
TSW | Time Division Switch | ||
(Subordinate oscillator for the | |||
|
| ||
|
|
| |
PLO | Subordinate Oscillator (for the | ||
|
| ||
High Precision Oscillator (for the | |||
| |||
|
|
|
Page 29
Issue 2