NEC ND-71762(E) system manual Ccis Service Features

CCIS SERVICE FEATURES

CHAPTER 7 CCIS SERVICE FEATURES

1. GENERAL

Table 7-1 shows the list of CCIS service features. As for details of service features which are shown in Table 7-1, refer to “Feature Programming Manual” that explains each service feature by the following items.

•General Description

•Operating Procedure

•Service Conditions

•Interactions

•Programming

(1)General Description

(2)Operating Procedure

This item explains the procedure to be followed for receiving a specific service feature concerned. When testing a service feature, perform installation test work steps by referring to this item.

(3)Service Conditions

This item explains the functional outline of a specific service feature concerned and the matter of caution (hard- ware requirements, etc.) related to performance of that service feature. It is recommended that these items be referred to for more extensive knowledge of the service feature concerned.

(4)Interactions

This item explains the service conditions or hardware requirements when using together with other service fea- tures.

(5)Programming

This item explains the procedure of assigning various kinds of data required for performance of a specific ser- vice feature concerned. When recording necessary data into Data Programming Sheets provided in the “Office Data Specifications”, make data entry by referring to this item.

ND-71762 (E)CHAPTER 7

Page 81

Issue 2