NEC ND-71762(E) system manual Command Name

BASIC DATA ASSIGNMENT

Note 3: When either of the two parties that are eventually connected (after a call transfer) is ATTCON, Link Re- connection cannot be provided. (At this point, even if the ATTCON transfers the call to a station in the same node and Station-to-Station connection is established, this function is not available.) In addition, this function is not provided when either of the two parties that are eventually connected has a held party.

In the following case, Link Reconnection is not provided:

Example 3:

1.A call between Station A and Station B is established.

2.Station B transfers the call to ATTCON C.

3.After connecting to ATTCON C, Station B is released.

4.At this time, Link between Station A and ATTCON C is not reestablished.

5.ATTCON C transfers the call to Station D.

6.After connecting to Station D, ATTCON C is released.

7.Link Reconnection (between Station A and D) is not provided.

Station A

Node A

Node B

	Station D
Transfer to
StationD	ATTCON C

Station A made a call to Station B

Station B transferred the call to Attendant Console C

Station B

Note 4: In case a call is connected to the announcement trunks used for Delay Announcement-UCD service and ACD Delay Announcement service, Link Reconnection function is not provided. (At this time, if the call is eventually connected to UCD station/ACD agent position after the UCD station/ACD agent position be- comes idle state, this function is provided.)

2)Index 187:Assign 00 Hex always.

STEP 2:	Route Data Assignment	COMMAND NAME
		ARTD

Assign the following three routes for this feature:

•Speech Path Route (Traffic Route)

•Signaling Route

•Dummy Route (Flag Route).

ND-71762 (E)	CHAPTER 6
	Page 71
07/31/02	Issue 2