Manage the WAN and LAN Network Settings
71
N150 and N300 WiFi DSL Modem Routers
6. To disable the SIP ALG, select the Disable SIP ALG check box.
The SIP ALG is enabled by default.
7. To disable the FTP ALG, select the Disable FTP ALG check box.
The FTP ALG is enabled by default.
8. Click the Apply button.
Your changes are saved.
Manage the Modem Router’s LAN IP Address
The modem router is preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The modem router’s default LAN IP configuration is as follows:
•LAN IP address. 192.168.1.1
•Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. The IP address and subnet mask identify which
addresses are local to a specific device and which must be reached through a gateway or
router. You might want to change these settings if you need a specific IP subnet that one or
more devices on the network uses, or if competing subnets use the same IP scheme.
To change the LAN TCP/IP settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.