N150 and N300 WiFi DSL Modem Routers

10.(Optional) Change the NAT filtering mode:

Secured. In secured mode, the modem router inspects both TCP and UDP packets.

Open. In open mode, the modem router inspects UDP packets only. This is the default mode.

11.Click the Apply button. Your settings are saved.

Set Up an IPv6 Pass-Through Connection

In IPv6 pass-through mode, the modem router works as a Layer 2 Ethernet switch with two ports (LAN and WAN Ethernet ports) for IPv6 packets. The modem router does not process any IPv6 header packets.

Note: Follow the directions that your IPv6 ISP gave you.

To set up an IPv6 pass-through Internet connection:

1.Launch an Internet browser from a computer or WiFi device that is connected to the network.

2.Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

4.Click the OK button.

The BASIC Home screen displays.

5.Select ADVANCED > Advanced Setup > IPv6. The IPv6 screen displays.

6.From the Internet Connection Type menu, select Pass Through. The screen adjusts, but no additional fields display.

7.Click the Apply button. Your settings are saved.

Set Up an IPv6 Fixed Connection

A fixed IPv6 connection is based on a static or fixed IPv6 address that your IPv6 ISP gave you.

Note: Follow the directions that your IPv6 ISP gave you.

Manage the Internet Settings Manually

39

Page 39
Image 39
NETGEAR D500 and D1500 user manual Set Up an IPv6 Pass-Through Connection, Set Up an IPv6 Fixed Connection