Install and Access the Modem Router and Its Network
18
N150 and N300 WiFi DSL Modem Routers
•Clear the browser cache.
•If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the modem router.
12. Follow the onscreen instructions.
The NETGEAR genie automatic setup utility guides you through connecting the modem
router to the Internet.
When you are connected to the Internet, the NETGEAR genie BASIC Home screen
displays. If this screen does not display, see Step 13.
13. If the modem router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed
everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read Troubleshoot the Internet Connection on page 104. If problems persist,
register your NETGEAR product and contact NETGEAR technical support.
Set Up Your Modem Router for Cable or Fiber Service
You can install you modem router for cable or fiber (Ethernet WAN) service or for DSL
service. If you use a cable or fiber modem, follow the procedure that is described in Cable the
Modem Router for Cable or Fiber Service and Access the Modem Router on page 19. If you
use a DSL modem, follow the procedure that is described in Set Up Your Modem Router for
DSL Service on page 15.