Nextel comm i365 Bluetooth PINs, BluetoothBondsPairing, Bluetooth 141, Ten seconds after bonding

■To stop the search and return to the previous screen, press Cancel - (right softkey).

BluetoothBonds(Pairing)

A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices. Once the PIN is exchanged, the devices do not have to be in discoverable mode in order to exchange information. You only need to create a bond once between two devices.

If you search for devices and you select a device that you are currently bonded with from the list of found devices, then the current bond with that device will be voided. You will have to re-establish the bond.

Your i365 requires that you create a bond in order to connect with another device. However, you can choose to establish bonds with devices without connecting.

Note	Devices are automatically granted permission during
	the ten seconds after bonding.

Bluetooth PINs

Bluetooth devices exchange PINs (also known as passkeys or pass codes) in order to establish encrypted transfers between them. When prompted, enter the Bluetooth PINs.

Some Bluetooth devices ship with Bluetooth PINs. Please refer to your Bluetooth device’s user guide to locate this information.

If a device ships without a Bluetooth PIN, then you can enter any PIN for that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the device’s PIN, then enter 1234 as your phone’s PIN.

In some cases, you may not be required to enter the Bluetooth PIN.

To create a bond between your phone and another device:

1.Press M > Bluetooth.

2.If you want to create a bond and connect with the given device, select Hands Free > [Find Devices].

– or –

Bluetooth

Section 2G. Bluetooth 141