Nextel comm i365 manual Vibrate Settings, AssigningaRingTone to aContact, VibrateAll

AssigningaRingTone to aContact

You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone.

1.Press M>RingTones.

2.Scroll through the list of ring tones and select the one you want to assign. A sample ringer will sound as you highlight each option

3.Press r or press Assign- (left softkey).

4.Select AContact....

5.Highlight the Contacts entry to which you want to assign the ring tone.

6.Press r to assign the ringer.

Vibrate Settings

VibrateAll

The Vibrate All option allows you to mute all sounds without turning your phone off.

ToactivateVibrateAll:

1.Press M>RingTones>VibrateAll.

2.Press r.

3.Set this option to On or Locked, and then press r.

Tip	To set Vibrate All to On or Locked using the volume
	controls: Press the volume controls to turn down the
	volume as far as possible to set Vibrate All to On.
	Continue to hold the volume control down to set
	Vibrate All to Locked. Setting this option to Locked
	requires you to press and hold the volume control
	up to turn Vibrate All off. The Locked option helps
	prevent you from accidentally turning Vibrate All off.

66 Section 2B. Settings