Nextel comm i365 manual ConnectingtotheInternetoraNetworkfor the First Time, Data Services 197

8.Enter the user name and password for your Internet service and check the appropriate fields for connecting to your service provider (if applicable). Click Next and then Finish to complete the process.

ConnectingtotheInternetoraNetworkfor the First Time

Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions.

1.From Network Connections, select the dial-up connection you just created.

2.From the dial-up screen, click Properties.

3.From the Properties screen, click on the Networking tab, and click on Settings.

4.Remove the checkmark from EnableLCPExtensions, and click OK. You will then be returned to the dial-up screen and can now connect to the Internet or a network.

Testing the Connection with

HyperTerminal

A connection test can be performed using HyperTerminal to determine if your computer and phone are communicating.

1.Open HyperTerminal by clicking Start and selecting Accessories > Communications > HyperTerminal.

2.When prompted, enter a name and select an icon for the connection you are creating, and click OK.

3.Click on Connect using and select the COM port your phone is installed on. Click OK.

4.Click on Bits per second, and select OK.

5.To determine if your computer is communicating with your phone, use the following commands:

■ATI1 – This command will show you the modem model.

■ATI2 – This command will show you the software version that is on the unit.

■ATI3 – This command will show you the build date of the unit.

Data Services

Section 3B. Data Services 197