Nextel comm i365 manual Creating a Dial-up Connection, Name the dial-up connection and click Next

4.Under Manufacturer, select [StandardModemTypes]. For Model, choose Standard 19200 bps Modem, and click Next to continue.

5.Select the COM port you want your phone installed on, and click Next and then Finish to complete the installation.

Creating a Dial-up Connection

In order to connect to the Internet or a Network using your phone, you must set up a dial-up connection.

1.From the Control Panel select Network andInternet Connections, and then select Network Connections.

2.Under Network Tasks, select Create a New Connection. When the New Connection Wizard appears, click on Next to continue.

Note	To get to New Connections in Classic View, from the
	Control Panel select NetworkConnections, and click
	on New Connection Wizard.

3.Select Connect to the Internet and click Next.

4.Select Set up my connection manually and click Next.

5.From the Internet Connection screen, select Connect Using a Dial-up Modem and click Next.

Important	You may be prompted to select the modem
	you would like to use. Make sure you choose
	the Standard 19200 bps modem you created
	earlier.

6.Name the dial-up connection and click Next.

Tip	It might be helpful to give this dial-up connection a
	name that will remind you it is a modem connection
	for your phone.

7.Enter a number for circuit data dial-up that will connect you to you local ISP provider.

– or –

If you plan on connecting via packet data, enter S = 2, and click Next.

Important	Circuit Data users must be provisioned for
	Circuit Data by their carrier. Please contact
	your ISP to obtain a local dial-in number.
	Packet Data users must be provisioned for
	Packet Data by their carrier.

196 Section 3B. Data Services