255
Branch Office configuration
Contents This section contains information on the following topics:
"Configuring the Branch Office" (page 255)
"Summary of steps" (page 255)
"Configuring the Media Cards" (page 256)
"Configuring the trunks and lines" (page 256)
"Zone parameters" (page 256)
"Adding the Branch Office endpoints to the NRS database" (page 260)

Configuring the Branch Office

After connecting the MG 1000B Core to the network and configuring the
system user names and passwords (see "MG 1000B software installation"
(page 239)), complete the configuration.

Summary of steps

Perform the followingsteps to configure a Branch Office:
Step Action
1Configure the ELAN network interface IP address (see Procedure 21
"Configuring the ELAN network interface IP address" (page 246)).
2Configure the Branch Office dialing plan (see "Dialing plan
configuration" (page 291)).
3Configure Media Cards as voice gateways (see "Configuring the
Media Cards" (page 256)).
4Configure trunks and lines (see ) CS 1000E Installation and
Configuration NTP..
5Configure IP Phones (see "Installing and configuring IP Phones"
(page 264)).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright© 2007, Nor tel Networks
.