MG 1000B with MGC Data Networking 41
The following figure illustrates a typical network configuration that supports
dual homing of both the ELAN and TLAN. With this configuration, however,
a single Layer 2 switchremains a single point of failure.
Figure 6
Single server port network connections (dual-homing - non distributed)
The following figure illustrates a typical network configuration that supports
dual homing of both the ELAN and TLAN. Multiple Layer 2 switches ensure
there isn’t a single point of failure. Nortel recommends this configuration for
the highest reliability in a single CPU Call Server configuration. You must
partition the layer 2 switch into separate VLANs to keep the ELAN and
TLAN traffic on separate subnets
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20June 2007
Copyright© 2007, Nor tel Networks
.