Adaptive Network Bandwidth Management 85
Procedure 2
Displaying CAC parametersfor one or more zones
Step Action
1Select IP Network > Zones from the navigator.
The Zones web page opens (see Figure 14 "Zones web page"
(page 66)).
2Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as
shown in Figure 15 "Maintenance Commands for Zones web
page" (page 68). This page lists all the configured zones and their
intrazone statistics by default.
3Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRTZCAC) from the Action drop-down list.
4Select a zone from the Zone Number drop-down list, by doing one
of the following:
Select ALL to print statistics for all zones.
Select a specific zone number to display statistics for a specific
zone.
5Click Submit.
The Maintenance Commands for Zones web page reopens,
displaying the statistics for the specified zone or zones. A blank
field indicates that statistic is either not available or not applicable to
that zone.
Figure 22 "Element Manager - CAC parameters" (page 86) shows
an example of the CAC parameters forall Zones.
—End—
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20June 2007
Copyright© 2007, Nor tel Networks
.