Loading Paper

Your machine can hold up to 100 sheets of stan- dard-weight (20 lb.) paper. For best results, use paper specially made for laser printers or photo- copiers. Available sizes are A4, letter size and legal size.

Your machine automatically reduces the vertical length of the page images it receives to fit on the paper loaded in your machine (down to 75% of the original length). For example, if you are sent a document created originally on legal-size paper, your machine can reduce the received pages to fit on A4 or letter-size paper.

Tip: Your machine is set at the factory to use letter size paper. If you intend to use a different paper size, change the PAPER SIZE user function setting to match your new paper size. See the Programming chapter for instructions.

1Adjust the paper guides to the width of your paper.

Tip: Adjust the paper guide on the right side to the mark of the width of your paper. After completing paper setting (Item 3), the paper guide on the left side should be aligned to the paper’s width.

2Remove the paper from its wrapper (up to 100 sheets). Note the “print side” notice printed on the label. Fan the paper.

3Insert the paper into the paper tray, print side down.

Tip: Be sure to insert at least 11 sheets of paper into the paper tray. Any less than that brings up the “No-feed” response.

Caution: Be sure to grasp the paper tightly to avoid slipping of the uppermost sheet of paper.

24 OKIFAX 4580 User’s Guide

Page 24
Image 24
Oki 4580 manual Loading Paper