MF(TONE) DURATION: If your machine is set to tone dialing, this function controls the duration of the tones used for dialing (the tone duration varies in different countries). Available settings are 75 ms, 85 ms, and 100 ms.
PBX LINE: Turn this function on if your machine is connected to a PBX. Once this function has been turned on and the access digit function has been programmed, your machine recog- nizes the access digit you use in your PBX to get an outside line. After it dials your access digit, your machine pauses to wait for an outside line before dialing the rest of the telephone number. Available settings are on and off. See Connecting to a PBX in the Installation section for instructions on changing this setting.
FLASH/EARTH/NORMAL: If your machine is connected to a PBX, this function tells your machine about the type of PBX line your ma- chine is connected to. Available settings are normal (N) and flash (F).
AUTO START: When this function is turned on, your machine automatically begins dialing as soon as you have selected a location by press- ing a
DIAL PREFIX: If your machine is connected to a PBX, use this function to tell your machine what access number is used to obtain an outside line from your PBX. You can enter up to 4 digits. See Connecting to a PBX in the Installation section for instructions on changing this setting.
Changing Your Dial Parameter Settings
1Press the SELECT FUNCTION key.
2Press the 9/USER PROG.
3On the numeric keypad, press 2. The display shows 2:DIAL PARAMETER.
4Press YES until the display shows the dial parameter you want to change.
5Repeatedly press NO until the setting you want appears in the display.
6Press YES to confirm your selection. The name of the next dial parameter setting ap- pears in the display.
7Press the SELECT FUNCTION key to finish.