Oki 4580 manual Codes Used in Reports, Result Codes, Communication Codes

Codes Used in Reports

Result Codes

Result codes indicate the results of communica- tions.

Code	Description
BUSY	The other machine’s line was busy or there
	was no answer.
CANCL	A message was erased after being held in
	memory for 10 days.
COMP.	A multiple-location transmission was
	completed.
COVER	The fax machine’s cover was opened
	during the communication.
NO	The transmission or reception failed due to
	a communication error.
OK	The communication was completed
	successfully.
PUNIT	This error code indicates a problem with
	the printing unit. Contact your service
	person.
R_JAM	A paper jam occurred in your machine
	while it was receiving a fax, and your fax
	machine was unable to receive the entire
	message in memory.
S_JAM	A document jam occurred in the sending
	fax machine.
STOP	The STOP key was pressed, ending the
	communication session.

Communication Codes

Communication codes indicate the communication mode was used for a communication.

Code	Description
TX	A communication initiated by your fax
	machine.
RX	A communication initiated by a remote fax
	machine.
POLL RX	Polling Reception
POLL TX	Polling Transmission
POLL=**	Bulletin Polling Transmission (** is the Box
	No.)
CONF=**	Confidential Reception (**is the Box No.)
FWD-T	Forwarding Transmission
FWD-R	Forwarding Reception
B.C.	Broadcast Transmission

66 OKIFAX 4580 User’s Guide