You sent a fax but the image the remote fax machine received was very poor.
If your document had a lot of small type, complex illustrations, photos, or was very light or very dark, try changing your Transmit Resolution and Type of Original settings (see Loading Documents in the “Basic Faxing Operations” section). Copy the document on your machine to see how it will transmit. The problem may be caused by telephone line interference. Try sending the document again later.
You keep getting reports you do not want.
Check your user function settings and turn off the reports you do not want. See the “Customizing Features and Operations” section.
You sent a fax but it was received completely blank.
Make sure that you have loaded your document face down.
The image received on your machine was very poor
Contact the person sending you the fax and ask them to change their Resolution and Type of Original settings. Ask the person to make a copy of the document on their fax machine to ensure that it is working properly. Then ask them
to send the fax again. If you still have a problem, try making a copy of a document on your machine to make sure it is working properly.
You tried dialing using
Make sure that something is programmed into the Speed Dial key you are using. Check the fax number to make sure it was entered correctly (see the Basic Faxing chapter). When
you are dialing with an
Your machine does not answer the phone or receive faxes.
First check to see that the power cord is connected to the AC outlet. Also check the reception mode you are using. Your machine will not automatically receive faxes in manual answering mode [TEL]. See “Setting th e Answering Mode” in the Installation section.
Your received documents are light or have vertical streaks on them and you are not out of toner.
Gently wipe the lens surface of your machine’s LED array and then see if the machine works properly (refer to “Replacing th e Toner Cartridge”). If your machine still does
Handbook 93
