function settings to adjust machine operations to best fit the situation. During the programming sequence, the new default combination will be indicated on the control panel
Memory Full Save
Speed access no. 17
With features like group dialing, dialing starts after an entire document or set of documents is read into memory. If during this process, memory becomes full and an operator time out seems likely, a message to that effect is shown on the display if this function is set to ON. If it is set to OFF, data not read into memory is deleted automatically. Available settings are ON and OFF.
Instant Dial
Speed access no. 18
In the ON state, the document is scanned into memory and dialing starts immediately. Although the function relies on memory availability, connection to the remote location is confirmed and the document transmitted faster when memory is available. If it is set to OFF, the machine first confirms contact with the remote location and then transmits the document reading from the document tray (without scanning into memory).
Restrict Access
Speed access no.19
This function controls whether or not machine operation is restricted or not. In the ON state, if restriction IDs have been programmed, users must enter a password before being allowed access to the machine’s functions. Set to OFF, no password is required even if restriction IDs have been programmed.
ECM Function
Speed access no. 20
The error correction mode (ECM) function is provided to improve communications in areas where telephone line conditions are very poor. Available settings are ON and OFF.
Sender ID Switch
Speed access no. 23
This function determines if the Sender ID is to be printed on the transmitted fax. Available settings are ON and OFF: set to ON, the ID is included on the fax.
!In the United States, FCC regulation states that fax machines must identify the sender and the telephone
number of the sender on each page of every fax sent.
Handbook 67
