Oki 5900 manual Signal Tones, Accessing Second Panel of One-Touch Keys model

Speed Dial number, press the Plus key at the 40th position of the first part of the number to indicate it is a chain dial number, then complete the process by entering the second part of the number following the procedures required for inputting another Speed Dial number.

Pause Key (One-Touch key #40): Use this key to enter automatic 3sec pauses in dialing when programming telephone numbers. For example, use this key to tell the machine to wait for an outside or international line to open. (Pauses in a telephone number dialing sequence are indicated by a “P”.)

Other: Special character keys (, ; @ _ : / \ . +).

Accessing Second Panel of One-Touch Keys (model 5900)

To access the second panel of One-Touch keys (41-80 for model 5900) grasp the latch at the bottom of the keypad and lift up on the main panel, swinging it up and to the right. After pressing the desired key(s), close the main panel.

Signal Tones

The OKIFAX 5700/5900 machines emit a number of sounds to inform the user of specific conditions.

Key Select Tone: This is a short beep that is emitted each time a key is pressed.

Error Tone: If an inappropriate key is pressed, the machine emits three short beeps. If there is a problem with operations during communications, the machine emits five long beeps. Press the Stop key to turn the error tone off, and then print a Message Confirmation Report to check the source of the problem. To do this, press the Copy key twice in succession with no documents loaded.

End of Session Tone: At the end of each successful faxing session, the machine emits a long beep to confirm that there were no errors or problems in the communication.

Off-Hook Alarm Tone: If the machine is equipped with a telephone handset, and if the receiver of the handset is left out of the cradle when not in use, the machine emits an intermittent warbling sound. To turn off the sound, return the receiver to its cradle or press the Stop key.

Handbook 13