Oki 5900 manual Pulse Dial Rate, Pulse Make Ratio, Pulse Dial Type, T/F Timer Prg, CNG Count

Pulse Dial Rate

Speed Access no. 46

If the machine is set to DP, this function controls the rate of the dialing pulses (which vary by country). Available settings are 10, 16 and 20pps.

Pulse Make Ratio

Speed access no. 47.

If the machine is set to DP, this function controls the make rate of the dialing pulses. Available settings are 33, 39 and 40%.

Pulse Dial Type

Speed access no. 48

If the machine is set to DP, this function controls the type of pulse dialing it uses (types of pulse dialing vary by country). Available settings are N, 10-N and N+1.

T/F Timer Prg.

Speed access no. 62

When set to T/F, the machine will automatically distinguish between incoming voice and fax communications. The T/F timer controls how long the machine waits for the call to be

answered before switching to FAX mode. Available settings are 20 and 35sec.

CNG Count

Speed access no. 65

When set either in the T/F or TAD modes, the machine detects the type of signal (calling tone, CNG) sent from the remote location and initiates fax reception if required. This function sets the CNG detection number. The available setting is 1-5 times (numeric keypad input).

Ring Response

Speed access no.66

This function controls how long the machine waits before answering an incoming call. The available settings are 1 ring, 5, 10, 15 and 20sec.

Distinctive Ring

Speed access no 67

Some telephone carriers offer a service called Distinctive Ring. Distinctive Ring lets you have different numbers on one line, each with its own distinctive ring. You can then use one number exclusively as a fax number without the expense of a second line. (Your local telephone carrier can provide

68 Handbook