Dial and Incoming Call Parameter Settings
These settings allow you to control the way your machine dials telephone numbers and received incoming calls. Setting these functions before beginning use of your machine will make your fax communications more efficient.
To set these parameters
1Press Menu/Exit to enter the menu.
2Input the speed access number.
3Use ▼ or ▲ to select the desired setting, Press Enter.
4Press Menu/Exit to return to standby mode.
Dial Parameter Settings
Note: Factory Default settings are in bold italics.
Redial Tries
Speed access no. 40.
This function controls how many times your machine will automatically redial a number that is busy or does not answer. Available settings are from 0 to10 tries. Speed access no. 40. The default setting is 3 tries.
Redial Interval
Speed access no. 41.
The function controls how long your machine waits between each automatic redial attempt. Available settings are from 1 to 6 minutes. Default setting is 3 minutes between dialing attempts.
Auto Start
Speed Access no. 42.
With this function set to ON, the machine will automatically begin dialing as soon as a location is selected by pressing a
Dial Tone Detect
Speed access no. 43
This function allows your machine to wait for and detect a dial tone before dialing. Set to ON, a dial tone must be detected.
Busy Tone Detect
Speed access no. 44
This function allows your machine to detect a busy tone when sending a fax. Available settings are ON and off.
32 Handbook