Oki 5900 manual Installation, Safety

Installation

To install your new OKIFAX 5700/5900, following the steps in this section.

∙Safety

∙Installation Hints

∙Operation and Maintenance

∙Toner and Image Drum Handling

∙Emergency First Aid

∙Getting Started

∙Setting Up Your Fax Machine

∙Loading Paper

Safety

Installation Hints

∙Install your fax machine in a dust-free location away from direct sunlight

∙Do not plug your fax machine into a power source shared by equipment that produces electrical noise (i.e., air conditioners, etc)

∙Leave electronic adjustments to authorized service personnel

∙The LINE terminal connects your fax machine to a standard telephone line. To avoid damage to your telephone system or to the fax machine, do not plug your fax machine into anything other than a standard RJ-11C jack.

∙Your fax machine is intended to be grounded electrically and is equipped with a three-wire grounded power cord. For your safety, do not attempt to defeat your power cord’s grounding plug.

∙The electrical outlet and phone jack should be installed near the equipment and should be easily accessible.

∙The two TEL terminals on the back of the fax machine are only suitable for 2 wire devices. Not all standard telephones will respond to incoming calls when connected to an extension jack.

∙This equipment may not necessarily provide for the effective hand-over of a call from a telephone connected to the same line.

∙The operation of this equipment on the same line as telephone or other equipment with audible warning devices, such as call waiting, or automatic ring detectors may cause false tripping of the ring detector.

14 Handbook