Initiating a relay broadcast:
1Load the document(s).
2Press Menu/Exit to enter Menu.
3Press ▼ to select Relay Initiate TX, press Enter.
4Enter the password
5Enter
6Enter the desired location using the Speed Dial number or numeric keypad, press Start.
7The machine will scan the document(s) into memory and begin faxing to the key relay station.
8If all memory is used, the display will show Memory Overflow, Send Scanned Pages?
9To send scanned pages, press Enter.
To set the relay report number:
1Press Menu/Exit to enter the menu.
2Press ▼ to select Location Program, press Enter.
3Press ▼ to select Relay Report No., press Enter.
4Enter the telephone number of the desired location using the numeric keypad (40 characters max.), press Enter.
5Press Menu/Exit to return to standby mode.
Sending Documents Requested by Another Fax Machine (Polling Transmission)
Sometimes it is useful to simply load your documents into your fax machine and set it to wait for the receiving fax machine to call and collect them. This is called setting your fax machine to be polled, or polling transmission. Your machine holds data in memory until transmission occurs.
Memory Polling
This feature enables remote machines to contact this machine and poll data directly from memory.
To set memory polling:
1Press Menu/Exit to enter the menu.
2Press ▼ to select Polling TX/RX.
3Press Enter to select Polling TX.
4Press ▼ to select Memory Poll, press Enter.
5Load the document(s).
6Document(s) are scanned and stored in memory, and display shows Waiting to be Polled.
Handbook 61