6.5 Setting Chart Speed (CHART)
6.5 Setting Chart Speed (CHART)
Chart Speed (unit: mm/h)
10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 75 | 80 |
|
|
|
|
|
|
|
|
|
|
90 | 100 | 120 | 150 | 160 | 180 | 200 | 240 | 300 | 360 |
375 | 450 | 600 | 720 | 750 | 900 | 1200 | 1500 | 1800 | 2400 |
|
|
|
|
|
|
|
|
|
|
3000 | 3600 | 4500 | 4800 | 5400 | 6000 | 7200 | 9000 | 10800 | 12000 |
|
|
|
|
|
|
|
|
|
|
The data for a
Key operation
ESC
DISP
3 sec
CH UP
CH UP
Indication | Description |
Press the [DISP] key for three seconds to enter the SET mode,
and select [ 
] using the [
] key. Then press the [ENT] key.
Using the [
] key, select one of the two kinds of chart speed, the No.1 and No.2 chart speeds. Then press the [ENT] key.
NOTE
CH UP
NOTE
| ESC |
|
CH UP | DISP | 3 sec |
|
|
The No.2 chart speed identifies the chart speed which takes effect in case the speed is changed by remote control (optional function).
For models without the remote control function, the setting of the No.2 chart speed is invalid.
Select a numeric code referring to the table above using the [
] key and press the [ENT] key.
Digital printing will not be carried out when the chart speeds are: 120 mm/h or more for a
When a pen model uses a fast chart speed such as 600 mm/h to 1500 mm/h, the position error of the time tick of a periodic printout may become as large as 2 cm for 1500 mm/h.
[ 
] is dispalyed and the setting is completed. Press the [ENT] key to set another channel; or press the [DISP] key for three seconds to return to the OPERATION mode.
6. SET
NOTE If you press the [ESC] key in the middle of setting, the indication returns to the
[ 
] and already set data will be aborted.
MODE
6 - 15
