6.7Adjusting the Trend Recording Format (TREND,
6.7Adjusting the Trend Recording Format (TREND,
This recorder prints in FIX or AUTO mode.
In FIX mode, dot printing is performed with a constant interval regardless of the chart speed (approx. 20 sec).
AUTO mode is provided to prevent the chart from being damaged during repetitive dot printing. This mode is useful for low chart speeds. The chart is protected from damage because the printout timing changes with the chart speed (approx. 20 to 90 sec).
Single printout (0.5mm dia.)
Repetitive dot printing
FIX | AUTO |
The initial value is ‘AUTO’. To set the trend recording mode, proceed as follows:
Key Operation
| ESC |
|
| DISP | 3 sec |
|
| |
|
| |
| CH UP |
|
|
| |
| CH UP |
|
| ESC |
|
CH UP | DISP | 3 sec |
|
|
NOTE
Indication | Discription |
Press the [DISP] key for three seconds to enter the SET mode.
Select the [ 
] display using the [
] key, and press the [ENT] key.
Specify AUTO or FIX using the [
] key. Then press the [ENT] key.
[ 
] is displayed and the setting is completed. Press the [DISP] key for three seconds to return to the OPERATION mode.
If you press the [ESC] key in the middle of setting, the indication returns to the
[
] and already set data will be aborted.
6. SET MODE
6 - 17
