3.1 Front Panel
➃
RCD ALM | ESC |
|
| |
DISP | FEED CH UP | |||
RCD |
➄
➁
➂
➀
1.Power switch (push-button type)
Pressing the switch turns the power ON and OFF.
2.Key panel (push-key type)
The panel contains five keys.
[RCD] key
Pressing the key starts or stops the recording.
ESC
DISP
FEED
[DISP] key, [ESC] key
(DISP function) | Cycles through the modes of display in the order of |
| AUTO, MANUAL, DATE, TIME and OFF. Also |
| selects between the OPERATION and SET modes |
| pressing for three seconds. |
(ESC function) | Exits from the menu in the middle of setting or selecting |
| procedures. |
[PRINT] key, [ | ] key |
(PRINT function) | Conducts the list printout (see subsection 4.6.1) and the | |
|
| SET UP list printout (see subsection 4.6.2). |
( | function) | Selects setting parameters (numerics or command |
|
| codes). Selecting step is upward circulation. |
[FEED] key, [ ] key | ||
(FEED function) | The chart is fed as long as this key is being pressed (see | |
|
| subsection 4.5.2.) |
( | function) | Changes the number of digits for setting numeric |
|
| values. The digit moves from high to low. |
CH UP
[CH UP] key, [ENT] key
(CH UP function) | Selects a channel for which the display shows the screen |
| in the MANUAL display mode. |
( function) | Makes a parameter entry or executes a function after |
| selecting parameters (numerals or command codes). |
| Pressing the key executes the settings. |
3 - 2
