7.15 Changing the Temperature Unit (/D2 option)
For the TC or RTD type, the recorder will automatically append the temperature unit (°C or °F).
The initial value is expressed in ‘°C’, and common for all channels.
SETTING PROCEDURE:
Enter the SET UP mode by turning ‘ON’ the power while pressing and holding the [CH UP] (
ENT) key until the SET UP display appears.
Use the [
] key to select the display [ 
]. Press the [ENT] key.
Select [ | ] (°C) or [ | ] (°F) using the [ ] key. |
Press the [ENT] key. The display [ | ] appears. | |
Before leaving the SET UP mode, you have to store your new settings. Use the [
] key
to select the [ 
] display, and press the [ENT] key.
Select [ 
] to keep your new settings or [ 
] to abort the settings, and press the [ENT] key. After a few seconds, the OPERATION mode will appear.
NOTE When you change this setting, all settings in the SET mode will return to their initial values.
7 - 16
