7.8Assigning Different Colors to Channels
7.8Assigning Different Colors to Channels (Dot-printing model)
You can assign any of the six provided colors to any channel. The initial setting is as follows:
ch.1 = purple ch.2 = red ch.3 = green ch.4 = blue ch.5 = brown ch.6 = black
SETTING PROCEDURE:
Enter the SET UP mode by turning ‘ON’ the power while pressing and holding the [CH
UP] (ENT) key until the SET UP display appears.
Use the [] key to select the display []. Press the [ENT] key.
Select the channel No. for which you want to change a color. Then press the [ENT] key.
Select the color. Then press the [ENT] key. The display [] will appear.
Before leaving the SET UP mode, you have to store your new settings. Use the [] key
to select the [ |
|
| ] display, and press the [ENT] key. |
| ||
Select [ |
|
| ] | to keep your new settings or [ |
| ] to abort the settings, and |
|
|
|
press the [ENT] key. After a few seconds, the OPERATION mode will appear.
7. SET UP MODE
7 - 9