7.18 Initializing Settings
7.18 Initializing Settings
The settings which can be initialized concern the settings done in the SET mode only.
This initialization does not affect any settings in the SET UP mode.
SETTING PROCEDURE:
Enter the SET UP mode by turning ‘ON’ the power while pressing and holding the [CH
UP] (
ENT) key until the SET UP display appears.
Use the [ | ] key to select the display [ | ]. Press the [ENT] key. | |
Select [ | ] or [ | ] using the [ | ] key. |
Press the [ENT] key. The display [ | ] appears. | ||
When leaving the SET UP mode, and you want to initialize your settings. Select the
[ 
] display with the [
] key and press the [ENT] key.
Select [ 
] to initialize or [ 
] to abort initialization, and press the [ENT] key. After a few seconds, the OPERATION mode will appear.
7. SET UP MODE
7 - 19
