
5.2 Procedures to Enter Setting Data
5.2 Procedures to Enter Setting Data
Data setting is done by the four keys on the key panel which are referred to by the marks on the keys.
ESC
RCD | DISP | FEED | CH UP |
ESC
DISP
FEED
[ESC] key : Cancels the already set data in the middle of a setting; after canceling, the
previous indication will be shown on the indicator.
[ | ] key | : | Selects parameters of any setting, or selects any numeric characters in case of |
|
|
| ranges, alarms, offsets, date/time and so on. |
[ | ] key | : | Moves the cursor to the next digit while entering parameters. Since there is |
|
|
| no backspace key provided, this key will move to the first digit after the last |
|
|
| digit. |
CH UP [ENT] key : Confirms a set value for entry. Pressing the key moves the indication to the
next setting display.
NOTE While in the SET mode, [RCD] key is effective. Pressing [RCD] key starts or stops the recording.
5. DATA SETTING GUIDES
5 - 7